| INFORMATION REQUEST FORM at bottom of this Page |
 |
ACRYLOPRIME™ ELASTOMERIC ADHESIVE Light GRAY BONDING PRIMER |
|||
|
#70010-5 (5 Gallon), #70010-55 (55 Gallon) |
SPRAY/BRUSH/ROLL |
|
High Solids Elastomeric Acrylic Waterproofing Adhesive Light Gray Bonding Primer. A High Solids Resin Formula with a Low Pigment Concentration. Formulated for Unsurpassed Adhesion to Most Any Surface. |
|||
SPREAD RATE: 150-200 square feet per gallon |
|||
TECH DATA: Solids by Weight: 71% Solids by Volume: 51% Weight per Gallon: 10.0 lbs. |
|||
ACRYLOLOCK™ HIGH pH HOT SURFACE CONDITIONER and CHALK SEALER |
|||
|
#70015-5 (5 Gallon), #70015-55 (55 Gallon) |
SPRAY/BRUSH/ROLL | |
100% Acrylic Hi-pH Cement and Masonry Sealer; Excellent to Seal Fresh Mortar Joints on NEW Concrete Block Construction. Excellent Chalk Sealer on Most Any Surface. |
|||
SPREAD RATE: 250-300 square feet per gallon |
|||
TECH DATA: Solids by Weight: 10% Solids by Volume: 9% Weight per Gallon: 9.0 lbs. |
|||
ACRYLOPATCH™ WATERPROOFING CAULK, PATCH, FILLER & SEALANT |
|||
|
#70020-5 (5 Gallon) |
TROWEL | |
High Solids Acrylic Waterproofing Adhesive Caulk & Patching Compound. Brush or Trowel Applied for Filling Holes, Cracks, and other Imperfections with virtually no shrinkage. |
|||
SPREAD RATE: 150 cubic inches per gallon |
|||
TECH DATA: Solids by Weight: 88% Solids by Volume: 64% Weight per Gallon: 14.0 lbs. |
|||
ACRYLOBASE™ BASE COAT for ACRYLOMESH™ OVERLAY & UNEVEN SURFACES |
|||
|
#70030-5 (5 Gallon) |
TROWEL | |
High Solids Waterproofing Acrylic Adhesive Flexible Gray Base Coat. Base Coat Trowel On Overlay for Applying Over ACRYLOMESH™. Excellent for Filling and Leveling Minor Uneven Surfaces. For Extensive Filling inquire about ACRYLOPATCH™. Use ACRYLOBASE™ before application of ACRYLOSTUK™, ACRYLOSAND™, and ACRYLOTEX™ textures. |
|||
SPREAD RATE: 26-30 square feet per gallon |
|||
TECH DATA: Solids by Weight: 85% Solids by Volume: 60% Weight per Gallon: 13.4 lbs. |
|||
ACRYLOSTUK™ STUCCO/CEMENT LOOK WORM or SWIRL TEXTURE COAT |
|||
|
#70040-5 (5 Gallon) |
TROWEL | |
High Solids Waterproofing Acrylic Trowel Applied Worm or Swirl Texture Coating. Easy to Use for a Durable Cement/Stucco-Look Decorative Finish. Excellent Anti-Spalling & Crack Resistance. |
|||
| SPREAD RATE: 28-32 square feet per gallon | |||
| CLICK HERE FOR SAMPLE PICTURES of ACRYLOSAND™ and ACRYLOSTUK™ DESIGNER TEXTURES | |||
TECH DATA: Solids by Weight: 89% Solids by Volume: 62% Weight per Gallon: 13.5 lbs. |
|||
ACRYLOSAND™ KNOCK DOWN, PULL, SWIRL or SAND TEXTURE COAT |
|||
|
#70050-5 (5 Gallon) |
SPRAY/TROWEL | |
High Solids Waterproofing Acrylic Trowel or Spray Applied Texture Coating. Easy to Use for a Durable Cement/Stucco-Look Decorative Finish. Excellent Anti-Spalling & Crack Resistance. |
|||
SPREAD RATE: 40-60 square feet per gallon |
|||
| CLICK HERE FOR SAMPLE PICTURES of ACRYLOSAND™ and ACRYLOSTUK™ DESIGNER TEXTURES | |||
TECH DATA: Solids by Weight: 88% Solids by Volume: 64% Weight per Gallon: 14.0 lbs. |
|||
ACRYLOTEX™ ELASTOMERIC SAND or COARSE SPRAY ON TEXTURE COATING |
|||
|
#70070-5 (5 Gallon), #70070-55 (55 Gallon) |
SPRAY/ROLL | |
Elastomeric Acrylic Insulating Ceramic Waterproofing Texture Coating. Can be Rolled On but Spray Application is Recommended for Premium Uniform Finish. |
|||
SPREAD RATE: 75-100 square feet per gallon |
|||
| CLICK HERE FOR SAMPLE PICTURES of ACRYLOTEX™ SAND and COARSE DESIGNER TEXTURES | |||
TECH DATA: Solids by Weight: 64% Solids by Volume: 46% Weight per Gallon: 11.6 lbs. |
|||
ACRYLOTHERM™ (optional upgrade) SMOOTH INSULATING CERAMIC MID-COAT |
|||
|
#70085-5 (5 Gallon), #70085-55 (55 Gallon) |
SPRAY/BRUSH/ROLL | |
Elastomeric Acrylic Urethane Maximum Ceramic Content Mid-Coat to add increased ceramic energy saving performance. An optional upgrade to be used after ACRYLOPRIME™ and Before ACRYLOSEAL™ or ACRYLOSATIN™ Smooth Finish Systems. |
|||
SPREAD RATE: 100-125 square feet per gallon |
|||
TECH DATA: Solids by Weight: 60% Solids by Volume: 49% Weight per Gallon: 10.2 lbs. |
|||
ACRYLOSEAL™ SMOOTH ELASTOMERIC CERAMIC MATTE FINISH COATING |
|||
|
#70075-5 (5 Gallon), #70075-55 (55 Gallon) |
SPRAY/BRUSH/ROLL | |
| Elastomeric Acrylic Insulating Ceramic Waterproofing Smooth Finish Coating. Final Colored Coat for the ACRYLOSTUK™, ACRYLOSAND™ and ACRYLOTEX™ systems. | |||
SPREAD RATE: 100-125 square feet per gallon |
|||
TECH DATA: Solids by Weight: 66% Solids by Volume: 47% Weight per Gallon: 11.8 lbs. |
|||
ACRYLOSATIN™ SMOOTH ELASTOMERIC CERAMIC SATIN FINISH COATING |
|||
|
#70080-5 (5 Gallon), #70080-55 (55 Gallon) |
SPRAY/BRUSH/ROLL | |
Elastomeric Acrylic Insulating Ceramic Waterproofing Smooth Finish Coating. Final Colored Coat for the ACRYLOSTUK™, ACRYLOSAND™ and ACRYLOTEX™ systems. |
|||
SPREAD RATE: 100-125 square feet per gallon |
|||
TECH DATA: Solids by Weight: 60% Solids by Volume: 48% Weight per Gallon: 11.0 lbs. |
|||
ACRYLOCLEAR™ 100% ACRYLIC CLEAR GLOSS SEALER FINISH COAT |
|||
|
#70000-5 (5 Gallon), #70000-55 (55 Gallon) |
SPRAY/BRUSH/ROLL | |
| 100% Acrylic Waterproofing Clear Sealer for Cementitious Surfaces or to provide an extra gloss finish over any ACRYLOCOAT System. | |||
SPREAD RATE: 200-250 square feet per gallon |
|||
TECH DATA: Solids by Weight: 28% Solids by Volume: 24% Weight per Gallon: 8.8 lbs. |
|||
ACRYLOTAPE™ POLYESTER SEAM SEALER and REINFORCING FABRIC TAPE |
||
|
#70090-2 (2" X 100'), #70090-4 (4" X 100'), #70090-8 (8" X 100') |
|
For Seam Sealing; Use ACRYLOPRIME™ as Saturant. (100 Foot Rolls) Available in 2”, 4” and 8” widths. |
||
Saturant Requirements (may vary): 2"x100'=.25 Gal/Roll 4"x100'=.5 Gal/Roll 8"x100'=1 Gal/Roll |
||
ACRYLOMESH™ POLYPROPYLENE REINFORCING SELF-ADHESIVE MESH |
||
|
#70095-6 (6" X 150' Roll), #70095-48 (48" X 150' Roll) |
|
For Foam, ICFs and Uneven Surfaces; Use with ACRYLOPRIME™ & ACRYLOBASE™. (150 Foot Rolls) Available in 6” and 48” widths. |
||
Apply ACRYLOPRIME™, set Mesh, then trowel on ACRYLOBASE™ to prepare for Texture Coat |
||
NATIONWIDE's CONTACT INFORMATION: Business Hours: (M-F 8am-5pm EST) |
Telephone: 941.753.7500 U.S. Toll Free: 1.800.423.7264 Fax: 941.753.1773 (24 Hour Dedicated Fax) |
|
7106 24th Court East - Sarasota, Florida 34243-3993 - U.S.A. |
|
|
E-mail: info@natcoat.net Directory of Sales Associates Web: webmaster@natcoat.net |
EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions. |
LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NCCMI and under no circumstances shall NCCMI be liable in any respects to the building, it’s occupants, it’s contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty. |
| LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind. |
| LIMITATIONS: Any implied warranty, including warranty of fitness for a particular use or purpose, and warranty of merchantability, is limited in duration to the express warranty based on the Individual Product's Warranty, unless a shorter period is permitted by law. If no Warranty is stated for a specific product then the maximum warranty will be One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was not applied for using a Warranty Registration Certificate, the maximum warranty will be One Year from Date of Purchase. NCCMI shall not be liable for incidental or consequential damages or for damage to the building, it’s contents, or it’s occupants. NCCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty or any other theory or cause of action. Venue in reference to any Product of Nationwide shall be Manatee County, Florida, U.S.A. |
| DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Chemical Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so. |
| Copyright ©1998-2010 NATIONWIDE CHEMICAL COATING MFRS., INC. |
